£20.92 (Ex VAT)

Maintenance Spill Kit 1 Clear Bag 15 Litres

This small sized maintenance spill kit, also known as a general purpose spill kit, contains a range of general purpose absorbents that are suitable for use inside and out.  It is ideal for spills, leaks, drips of non-corrosive liquids, hydrocarbons, solvents, other aqueous, and organic liquids.

This kit is designed for dealing with general spills of carried goods or of the vehicles own fluids.  The grey vehicle container is manufactured from high density polyethylene of 3mm thickness.  It has the benefit of a nylon coated handle and stainless steel fastener. The extended sides make easy to mount on the outside of vehicles, on trailers or placed in rear end of a cab.

The fast acting, powerful absorbents in this kit have a high material strength and liquid retention.

Maximum absorbency capacity 15 Litres

SKU: 501/03001 Category: Tags: , , , , , ,

Description

Maintenance Spill Kit 1 Clear Bag 15 Litres

This small sized maintenance spill kit, also known as a general purpose spill kit, contains a range of general purpose absorbents that are suitable for use inside and out.  It is ideal for spills, leaks, drips of non-corrosive liquids, hydrocarbons, solvents, other aqueous, and organic liquids.

This kit is designed for dealing with general spills of carried goods or of the vehicles own fluids.  The grey vehicle container is manufactured from high density polyethylene of 3mm thickness.  It has the benefit of a nylon coated handle and stainless steel fastener. The extended sides make easy to mount on the outside of vehicles, on trailers or placed in rear end of a cab.

The fast acting, powerful absorbents in this kit have a high material strength and liquid retention.

May be safely used with all aqueous solutions and liquids immiscible with water, such as hydrocarbons, solvents, mineral oils, with the exception of strong oxidising agents.  Before any use in a spill situation a proper risk assessment should be carried out and all hazardous properties of the liquid or dangerous reactions taken into account.

Maintenance Spill Kit Contents:

QuantityProductSize
10Maintenance Absorbent Pads40 cm x 52 cm
2Maintenance Absorbents Socks125 cm x 7.5 cm
1Flow Stopper Clay Drain Mat22.5 cm x 20 cm
1Waste Disposal Bag and Tien/a

Training

If you are unsure of how to use absorbents, we have high quality 17 minute Spill Response and Pollution Prevention Training Video.  It is available from Spills Kits Direct SKU: 504/04001

   

 

Features and benefits

  • Colour coded for correct response.
  • Ideal for a fast response to small spills.
  • High quality absorbents
  • Packaged in clear snap handle bag for easy identification
  • This is a cost-effective spill kit with rapid clean-up benefits.
  • Essential for your spill response plan and ideal for meeting requirements of ISO 14001
  • Maximum absorbency capacity 15 Litres

Fire resistance

  • Good. (Physically flame-retardant).
  • Incinerable to zero ash

Disposal

  • Used sorbents may be disposed of by landfill or incineration, in accordance with local and national regulations, taking into account the classification of the liquid absorbed

 

Recommended usage

    • Primarily used for dealing with spills that pose an environmental threat in areas like:
    • Road traffic.
    • For dealing with spills of carried goods or of vehicle’s own fluids
    • Use: Inside or outside, store on vehicles (under or behind a seat) and in storage areas.
    • In and around plant machinery.

Classification of waste

    • We would always recommend that you check the latest details on the Government’s website to ensure you control and handle waste correctly

Tested in accordance with:-

    • ISO 10319:2024 (Geosynthetics, wide-width tensile test)
    • BS 7959-1:2004 (Materials used for the control of liquid spillages determination of sorbency)

Question:  What is the ISO 10319:2024 standard?iso 10319:2024

Answer:  In brief it is a tensile test.  The standard specifies a tensile test method that covers the measurement of tensile force, elongation characteristics and includes procedures for the calculation of secant stiffness, maximum load per unit width and strain at maximum force. Singular points on the tensile force-extension curve are also indicated.  Procedures for measuring the tensile properties of both conditioned and wet specimens are included in this document.

Question:  What is the BS 7959-1:2004 standard?

bsi 7959-1:2004Answer:  In brief it is used to assess sorbency.  The standard looks at the sorbent materials.  These are generally available in two basic types.  There are hydrophobic grades (so-called oil sorbents) that pick up oils and other organic liquids but repel water and most aqueous solutions.  Hydrophilic grades, on the other hand, pick up both oils and organic liquid and most aqueous solutions of chemicals.  The absorbency (litres of liquid absorbed per kg) is greatly influenced by the liquid viscosity and drainage time.  We quote minimum absorbencies based on laboratory tests carried out using SAE10W40 motor oil in line with the British Standard Test Method BS7959-1:2004 (30 second drainage time, at 20C) and maximum absorbencies with no drainage.

Related products